Western Reserve Controls WRC-CANR-DF-SM Manuel d'utilisateur télécharger pdf (Page 11)

Western Reserve Controls WRC-CANR-DF-DN User’s Manual

PUB 14.1

Green LED TXF is illuminated when data is actively transmitted out to the fiber link.

Green LED RXF is on solid when its fiber cable is connected to the TX port of an active CANR-DF.

This LED flashes when data is actively received from the fiber link.

4.3. DIP Switch Settings

The WRC-CANX-XX Multiplexer has a 6-pole DIP switch. Switch positions 5 and 6 are used to set

the baud rate. (Switch positions 1-4 are reserved for future functions.)

Table 4-4 Baud Rate Settings

Baud rate Position

1-4

Position 5 Position 6

125K n/a ON ON

250K n/a ON OFF

500K n/a OFF ON

Autobaud n/a OFF OFF

1 2 3 4 5 6

0 1 0 1

0 1

Figure 4-2 DIP Switch Setting for Baud Rate

4.4. Power Requirements

The WRC-CANR-DF-DN CAN-Bus Extender subsystem is powered from the 11-25 Vdc provided by

the DeviceNet network. The WRC-CANR-DF-DN consumes 70 mA of current at 24 Vdc, or 1.8 Watts,

typical. See Section 3.

4.5. Network Cabling and Configuration

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Western Reserve Controls WRC-CANR-DF-SM Manuel d'utilisateur Page 11